Hardware


Laser Engraving Module If the Laser Engraving Module is causing problem to your printer, please report it here.
Heated Bed If the heated bed is causing problem to your printer, please report it here. For example, the heated bed is hot to the touch, but it shows NA on the touch screen. I made sure all the cables are properly and securely connected to the controller, but the problem persists.
Power Adapter If you have any questions about the power adapter, please post it here.
Touch Screen If you have any questions about the touch screen, please post it here. For example, the touch screen is black when the power is on; the 3D printing module can react to the operations on the touch screen.
CNC Carving Module If you have any questions about the CNC Carving Module, please post it here.
3D Printing Module If the 3D Printing Module is causing problem to your printer, please report it here. For example, the new filament can’t be inserted in to the hole. I pulled out the previous filament without heating the filament.
Controller If the controller is causing problem to your printer, please report it here. For example, the 3D Printing Module cannot move when the Z axis is connected to port 5 while the 3D Printing Module can move smoothly when the Z axis is connected to port 4. That means there is something wrong with port 5 on the controller.

About the Hardware category [Hardware] (1)
Filament Problem [3D Printing Module] (1)
Heating uncontrolably [3D Printing Module] (4)
Layer shifts, need help [3D Printing Module] (5)
PLA Filament Reel Jamming [3D Printing Module] (14)
Controller or 3D module issue, print stop mid print [Controller] (9)
Parameters vs. materials [CNC Carving Module] (2)
Heating problem / Change Filament [3D Printing Module] (16)
3d Printer Max Extruder Feed Rate mm/s [3D Printing Module] (3)
Leather cutting with 1600mW [Laser Engraving Module] (2)
Min Temp Err at Random, NA at Random on Board and Nozzle [Hardware] (4)
CNC Frustration [CNC Carving Module] (7)
Z-Axis falling down? ( 2 3 ) [Hardware] (42)
Bed leveling for pcb milling? [CNC Carving Module] (4)
Reverse Engineering the Module Wiring [Hardware] (5)
Extendind work area [Laser Engraving Module] (3)
Printer restarting [3D Printing Module] (8)
Where to buy Module or some Spare parts [Hardware] (3)
Laser module pinout [Laser Engraving Module] (2)
Z-Axis Extension not working [Controller] (8)
Glass bed for Snapmaker [Heated Bed] (8)
Can't move Z-Axis down when focusing laser [Laser Engraving Module] (2)
Want to purchase additional print heads [3D Printing Module] (5)
Polycarbonate printing possible? [Hardware] (2)
Focus Adjustment [Laser Engraving Module] (3)
Stop button stopped working [Touch Screen] (2)
Power Switch Alternative? [Hardware] (5)
Printer module offcenter [Controller] (2)
Solved! Adheasion of Filament to the bed every time [Heated Bed] (2)
Nozzle thermistor release screw not fitting [3D Printing Module] (8)